marchsquash26
User Name: You need to be a registered (and logged in) user to view username.
Total Articles : 0
https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-watford/
Patio Doors Repairs Patio doors give homeowners fresh air and light and enhance the value of a house However over time they may develop problems that require immediate attention Understanding how patio doors operate will help homeowners communicate better with contractors regarding issues they encounter Here are a few of the most frequently encountered patio door problems Rollers that are not aligned Its sometimes difficult to open a sliding patio door Most of these sluggish sliding patio doors can be fixed with a bit of oiling and cleaning unless a structural issue is present The most frequent cause is dirt on the lower track which could cause the rollers to rub against the track at the bottom and cause them to misalign In this case youll need to clean the track and apply a light coating of lubricant to let the rollers glide smoothly It can be caused by wear or damage to the hinges that connect the door panels that house some of these rollers springs whether torsion or extensions and cables which lift the door When damaged or worn these components can cause problems with the alignment of the rollers causing resistance as well as a heavier door or higher energy bills Regular maintenance checks and inspections by a professional can help ensure that all these elements work in harmony to ensure that your patio door is operating smoothly Create a crows foot at one end and use a trammingstick to sweep across the rollers Note the distance each roller travels Repeat the process on the other end of the track and then divide by 2 to get a measurement of the rollers parallelism Photo 1 This method isnt as accurate as using pi tapes to measure diameter directly but its faster and easier than measuring each rail with a level or carpenters level You can also check the alignment of the rollers by taking off the head stop It is an aluminum plate situated at the bottom of the door jamb It stops the rollers This requires the removal of any grilles or shades that are removable and if the door is heavy obtaining help with this step After the head stop has been removed remove the screws that adjust the head track by pushing them out using an screwdriver Reinstall the assembly by aligning each screw adjustment for the roller with its access hole and tapping it in with a hammer Dirty or damaged tracks Patio doors that slide can serve as magnets for dirt debris and other outside elements They are also susceptible to misalignment as well as other issues that may require professional repairs In order to extend the lifespan of your patio door the identification and resolution of these issues early on is essential One of the most common causes for sliding patio doors to fail is filthy tracks Over time dirt and other particles such as pet hair food crumbs and yard debris can get trapped in the narrow spaces between your sliding door tracks which can cause it to get stuck or difficult to open To avoid these issues it is recommended to clean and vacuum your patio door tracks once every month You can clean your patio door tracks with a nonabrasive cleaning solution or warm soapy tap water once youve removed any loose debris If you find that certain areas of the track are difficult to clean use a butter knife or toothbrush to clean these small spaces You should also lubricate the tracks regularly to avoid your sliding door becoming stuck or difficult to open If you have Panda patio doors we recommend adding silicone spray to the bottom track on a regular basis You can also use paraffin wax to increase the glide A draft or a leak of air can also impact your sliding patio doors This can happen when the weather stripping on your sliding patio door has worn out or has been damaged This could cause gaps between your patio door and the frame This lets air in and reduces the energy efficiency Ensure that your weather stripping is in good condition and replace it as needed Over time your patio door may see normal wear and tear However these issues are usually not indicative of a serious issue In most cases small repairs can prolong the lifespan of your patio door and ensure that it is operating properly Contact a professional to address any problems as soon as they are apparent to avoid costly repairs in the future Glass that is damaged or warped A patio door that is damaged or cracked could be a major eyesore and could be security risks It also allows in unwanted creatures and cause your homes temperature change dramatically Thankfully these problems are usually fixable when they are caught early First a quick glance at the glass can determine the type of repair is needed Usually cracks in glass are due to stress or impact These are a little more difficult to repair than simple chipping on the surface A professional may require releading the panel This will require taking the glass off cleaning and replacing any broken pieces To do this an expert will require precise documentation of the piece in its original form to aid in comparing the new glass to the old Sometimes cracks in glass can be filled with epoxy plastic It can be purchased at a hardware store or the home improvement section of many stores A professional will use a soldering tool to melt the plastic and then apply it on the crack Once the plastic has cooled the professional can remove any excess If the crack in the glass is small there may be a chance to repair it with clear sealant You can purchase this kind of sealant at any hardware retailer However it is important to thoroughly dry the cracked area before applying sealant This will stop the repair from failing You can accelerate the process by using a hair dryer or another fan Weatherstripping damaged A weather stripping that is worn out is not just ugly and can pose a security risk however it also allows outside air and heat to escape A quick fix with a new piece of weather stripping can save you money while keeping your home more comfortable First ensure you have all the necessary tools and materials This includes a new weather stripping kit or caulk sealant or adhesive depending on your chosen repair method and pliers scissors a utility knife and some gloves or goggles that are protective Remove the old weather stripping by cutting the end piece and then pulling it up along with any attaching screws in the event that they are needed Then take care to remove any pieces left over using pliers or a pry bar If you decide to replace the weather stripping begin by measuring the gap that is around the door frame Use the measurements to determine the size of weather stripping you need Be RepairMyWindowsAndDoors to leave an extra length for later finetuning Once youve found the perfect size then apply the backing with adhesive and press it against the frame If desired tack it in place using the nail or hammer Apply wood filler to the frame to cover any holes or divots Let the filler dry completely before applying any paint It is best to use oilbased paint but latex will also work The last thing to do is make sure you clean your sliding tracks and doors regularly Making the effort to do this prevents sticking and other issues down the road Repairing and maintaining your patio doors will ensure that they remain functional attractive and energyefficient Youll save money while enjoying the outdoors while doing so Happy fixing your home