bootkendo5

User Name: You need to be a registered (and logged in) user to view username.

Total Articles : 0

https://www.repairmywindowsanddoors.co.uk/patio-door-repairs-corby/

How to Fix Sliding Patio Door Track Repair Sliding patio door are beautiful and convenient but they can develop problems in time making them difficult to use These issues are usually caused by dirty or damaged tracks or rollers These can be repaired with WD40 and a thorough cleaning Use your vacuum cleaner to get rid of any heavy dirt and debris Then scrub the track with brushes and cleaning products as you move the door backwards and forwards periodically Apply a siliconebased grease to reduce friction Repairing Dented Tracks A patio door can be a gorgeous addition to any home but when it stops sliding or doesnt open smoothly it can be a frustrating experience The good thing is that in many cases a few simple steps can allow your sliding door to return to its normal operation Dirt in the track channels can be one of the major causes for the door becoming stuck or is difficult to move To fix this you should take the door off the track Clean it thoroughly To get to the deeper dirt you can use a toothbrush or similar tool to dislodge it After the track has been cleaned a siliconebased oil can be applied to prevent future problems Inspect the rollers for any damage or misalignment The rollers are located at the bottom of the doors and guide them along the track If theyre damaged or misaligned the doors might be difficult to move and may require replacement Examine the tracks visually to look for any bends or dent Bends that are inward can squeeze and bind a door whereas outward bends can throw the rollers away or derail them If you notice bent tracks you can try to straighten them using a set of pliers or a hammer and block of wood However more severe bends may require professional repairs If these fixes dont work you might need to replace the entire track In this instance you can find track replacement kits in a majority of hardware stores that will allow you to put a new track over the old one and then screw it in place The track replacement kits are available in a variety of lengths and can be cut to fit your particular doors Its also a good idea to take note of if your track is deforming breaking or showing signs of wear In most cases professionals will be able determine the root of the issue and recommend an option that is secure and efficient Repairing Broken Tracks Damage or dirt on the track could cause the door to become stuck or difficult to open Dirt and debris build up over time If your tracks are bent or damaged they might require professional repair or replacement Fortunately there are ways to determine the issue and fix it yourself Check the track first to make sure its not blocked by anything other than dust or rust If the track is obstructed by anything other than dust or rust cleaning it thoroughly with a brush using mild detergent should remove obstructions and allow for smooth movement Next inspect the rollers to make sure they are not stuck or catching A damaged or broken door roller can cause it to become stuck It could also cause more track damage which will require professional repair or replacement It is possible to resolve the issue if the rollers are not damaged by lubricating the rollers Utilizing a siliconebased lubricant could help reduce friction between the tracks and the rollers which makes it easier for the door to slide A misaligned roller could cause your sliding door to become stuck or be difficult to operate To fix this problem locate the adjusting screw for the rollers Adjust them until they align in a proper way with the track Another reason that can cause an unmovable or stuck patio door is the worn weather stripping You can easily replace it by loosening the weather stripping from the bottom of the fixed panel as well as from the jamb using a screwdriver then pulling the old strip off and sinking the new one If your track is severely bent give it to a professional patio contractor They will be able to fix the issue and ensure that the track is held in place without any further damage or bends However if your track is bent only a little or kinked you may attempt to straighten it using a pair of metalbending pliers If you are unable to straighten the track on your own using a mallet made of rubber and a piece of wood to pound the bent section of the track until its completely straight Repairing damaged Rollers If your sliding patio door is a bit noisy or difficult to roll the reason could be due to your rollers They can get dirty and stiff over time causing the door to be pushed against the track and become noisy To solve the issue clean the bottom track first before lubricating your rollers When the rollers are clean you can put the door back on its tracks This is the ideal time to reattach any clips or braces that held the door in place while it was removed from the frame It is recommended to ask a friend to assist you in lifting up the sliding patio door and then tilt it toward you This will release it from the bottom track Set the sliding patio door on a stable flat surface such as a sawhorses or table Remove any removable grilles shades or drapes from the doors Remove fixing patio door holding the head stop molding Photo 2 On older doors made of aluminum this step isnt necessary but its good to do if you have one Then pull out the roller adjustment screw on the opposite side of the frame The screw controls the height of the rollers By turning it counterclockwise you will raise the rollers and clockwise will lower them It is a good idea to have someone nearby to help you disengage the rollers You will need tools such as a screwdriver with Phillips head and possibly prybars or a rigid putty blade for this Once the rollers are free and removed remove the dust cap from the wheel mechanism and clean them Then clean the roller surfaces with alcohol to get rid of any residue or dirt After the rollers are cleaned lubricate them using a siliconebased lubricant that resists dirt and helps keep them moving effortlessly Reinstall the door by putting the top part of the doors on the track and then moving the bottom part in Reinstalling the rollers into the track frame at their highest point is important This will allow doors to slide in effortlessly without rubbing against the tracks Repairing Damaged Wheels Often a patio door is dragging because the wheels wear out Replace the wheels if necessary Also clean the tracks to keep the grit from destroying the wheels Straighten bent tracks using pliers or by hitting the block of wood against the bent part with a Hammer If the wheels continue to wear out you can use the track sill Installation is easy and takes less than one hour